Application:
SPICO Submersible
Drainage Pumps have been designed and manufactured to transfer
water from shallow wells and to be used in agricultural,
industrial and domestic purposes.
Technical characteristics :
Submersible Drainage
Pumps with 2" and 3" delivery sizes, with different heads and
sufficient water delivery have been designed in 220V and 380V.
At the time of turning on and turning off the pump some
destructive strokes are conveyed to the pump and to the joined
pipe, which after some time the pipe may be disconnected from
pump. SPICO Co. has designed bronze screws on both sides of
delivery head so that by tightening them the pipe won’t be
released.
Parts: Pump casing, and the main
components are made of the special cast iron of Ductile, high
resistant to stroke and corrosion. Using shaft and screws of
stainless steel which are high resistant to oxidation and
corrosion. A rubber valve has been applied in these pumps in
order to prevent the return of the water inside of the pump.
Impeller: The impeller is designed
with bronze or stainless steel in option alloys which resist
strongly against abrasion.
Paint: All cast iron parts are
covered by a special paint of Epoxy (the paint used in coating
Ships’ hulks) which creates a good resistance to oxidation.
Cable: Use of special cable of
EPDM and CPE
types to resist against salts soluble in water, moisture and
acid or alkaline water.
Mechanical seal: Using
anti-abrasive seals (Silicon Carbide) with high quality to
increase pump lifetime. To supply high quality and more reliable
pumps and to increase the mechanical seals lifetime, SPICO has
applied a special chamber full of oil between pump and electro
motor which are sealed by using two mechanical seals and two oil
seals which the oil can be controlled by an Allen screw no.8.
Porosity impregnation: All casting
parts have been alloyed by professional experts to avoid any
pores or minute leaks in them. However, SPICO performs Porosity
Impregnation process for main casting parts by using special
machines and resin. So the electro motor penetrability to water
reaches zero.
ID: All SPICO products have a
serial no., engraved on pump casing, which is known as their
identification no. This number specifies the production file and
the technical ID of each pump which are kept in Company filing
system.
Guarantee: All SPICO products,
according to attached warranty terms, are guaranteed for SIX
MONTHS upon purchase date. Using high protective systems for
pumps are recommended.
